The VibraVision (VV1™)

Features listing

- Compatible with EMONITOR ODYSSEY™ Vibration   Analysis Software ( can replace Datapac, Entek, IRD, Enpac)

- Up to 75% reduction of Data Collection time

- Non-proprietary hardware, minimize the cost

- On the spot diagnosis ability since user configurable

- Event based data acquisition

- Dynamic two planes Balancing (optional)

Use of Roga plug.n.DAQ USB connectivity to any Tablet-PC Roga
VibraVision VV1 Specifications
Emonitoring odyssey compatibility X
Overall Levels ( Vibration Meter and Sound Level Meter mode) with advanced litening X
2 channel Real Time Analyser ( 2 channel scope including orbits), FFT and CPB spectra X
2 channel Digitale Recorder, Event Triggering and Playback X
Scan analysis and 3D waterfall option ( including tracking cursors) X
Measurement Sequencing ( Automated VRMA and Tour data collection ) X
Enveloping and advanced cursors for machine analysis ( harmonis, sidebands, delta and more ) X
VibraVision VV1 DataSheet (PDF)
Roga plug.n.DAQ Specifications
Analog Inputs: 2ch single ended BNC, IEPE
Impedance 100 kOhm
IEPE power 24V/4mA
Input ranges 5 V
Bandwidth 3.5 Hz to 24 kHz (-3dB)
10 Hz to 22 kHz (-0.5dB)
Sampling Frequency 32 kHz; 44.1 kHz & 48 kHz
Absolute accuracy 1% typical
Gain accuracy 0.2% or better
Distortion <0.05%
S/N 90 dB typical
Aliasing rejection -70dB (up to 0.4xfs)
Pass band ripple 0.05dB

Analog Outputs: 2ch single ended BNC
Output 1V, 100 Ohm
Bandwidth 1Hz–22KHz (+/-0.5dB, 48KHz FS)
0.5Hz–24KHz (-3dB, 48KHz FS)
Absolute accuracy 1% typical
Distortion < 0.02%
S/N > 90dB
Pass band ripple 0.2dB
Out of band rejection -50dB or better
Sampling rates (simultaneous sampling 16bit)
48KHz, 44.1KHz, 32KHz, 22.05KHz,
16KHz, 11.025KHz, 8KHz (analog in only)
Powered by USB (power consumption <1W)
Usable temperature range +/-0 to +50°C
Storage temperature range -10 to +60°C
Dimensions 82(w) x 150(d) x 32(h) mm
Weight Approx. 50 grams
Roga plug.n.DAQ DataSheet (PDF)

Need a Quote? Fill the Form below.

Name :

E-mail :


Question? Comment?: